Marine Adhesive - Contact 1 Litre

Price:

£63.63 (including vat)

Product Description

Combining the benefits of a contact adhesive with a high level of water resistance, this product provides and ideal method of fitting Treadmaster. With no mixing and the ability to walk on the deck immediately after fitting, Treadmaster Marine Contact is ideal for fixing to fibreglass, wood or steel decks.

INSTRUCTIONS FOR USE (Contact Adhesive)

Surface preparation

Surfaces must be clean, dry and free from oil and grease.

Existing paint, vanish, waxes, polishes, etc., must be removed.

Application

Stir thoroughly before use. The adhesive can be applied by brush or roller coater. Cut the Treadmaster to shape and mask off the deck area to fit exactly the Treadmaster panel. A space of 1-2"" should be left between adjacent panels. Apply a thin, even coat of adhesive to both surfaces, work fairly quickly and take care to keep the adhesive away from the face side of the Treadmaster. Allow to dry until the adhesive is only just touch dry (5 - 10 minutes depending on temperature). Then align the panel carefully and bring into contact with the deck surface, applying firm pressure, preferably with a small hand roller over the whole panel. Work from the centre to the edge to avoid air entrapment.

Storage Conditions

Keep containers closed and in a cool (10°C - 20°C) dry place away from direct sunlight.